March 2001
Due to the continuous commitment to modernize our
production in order to increase the efficiency, in the spring
of 2001 we invested once more in our machinery. The numerical-control
beveller MAX/60 CNP incorporates the most
advanced technology in bevel-working. The 13 wheel bevelling
machine processes glasses and mirrors with a minimum height
of 35 mm, a minimum size of 40 x 40 mm and a thickness from
3 to 20 mm. It can process bevels with an inclination from
3° to 45° and a maximum bevel width of 55 mm. It
can carry out single, double and triple bevels on the same
side of the glass.
|
